После того как вы нашли ошибку выдаваемою вашим мфу или принтером, лучше обратиться в сервисный центр. Как правило без сервисного инженера вам будет сложно, а зачастую невозможно устранить ошибку.

Наш сервисный центр работает для Москвы и М.О. в случае с другими регионами рекомендуем обратиться в местные сервисные центры.

Телефон сервисной службы: +7 (495) 208-47-48

Вопросы ?Отправьте быструю заявку
Ошибки Kyocera FS6020
  • Code: 0420
  • Description: serial communication error between paper feeder and engine/high voltage PWB.
    • Communication ready signal time-out occurs continuously more than specified times in serial communication with an optional paper feeder that is recognized by the CPU on the engine/high voltage PWB. • Inconsistency of values in serial communication data occurs more than specified times.
  • Code: 1210
  • Description: duplexer slide guide home position detection error.
    • The duplexer drive PWB of the optional duplexer cannot detect the home position of the slide guide.
  • Code: 2000
  • Description: main motor error
    • The main motor ready signal (MOTRDYN) does not become ready (low level) a specified time after the main motor drive signal (MOTONN) is turned on. • The main motor ready signal (MOTRDYN) does not become ready (low level) a specified time after the main motor drive signal (MOTONN) is turned off.
  • Code: 2610
  • Description: paper feeder 1 feed motor error.
    • When the paper feeder drive PWB of the optional paper feeder 1 drives the feed motor, no proper clock pulse is input from the feed motor clock sensor.
  • Code: 2620
  • Description: paper feeder 2 feed motor error
    • When the paper feeder drive PWB of the optional paper feeder 2 drives the feed motor, no proper clock pulse is input from the feed motor clock sensor.
  • Code: 2630
  • Description: paper feeder 3 feed motor error
    • When the paper feeder drive PWB of the optional paper feeder 3 drives the feed motor, no proper clock pulse is input from
  • Code: 2640
  • Description: paper feeder 4 feed motor error
    • When the paper feeder drive PWB of the optional paper feeder 4 drives the feed motor, no proper clock pulse is input from the feed motor clock sensor.
  • Code: 4000
  • Description: polygon motor error
    • The polygon motor ready signal (MOTRDYN) does not become ready (L level) within a specified time after the polygon motor drive signal (POLONN) is turned on (L level).
  • Code: 4200
  • Description: laser output error
    • The pin photo signal (PDN) is not output within a specified time after the polygon motor ready signal (MOTRDYN) becomes ready (L level).
  • Code: 6000
  • Description: fixing heater lamp/fixing thermistor error
    • The fixing thermistor disconnection detection circuit in the engine/high voltage PWB outputs the disconnection detection signal (THDEAD) to the CPU more than a specified time after power is turned on. • The fixing temperature does not rise at least 1 °C when the fixing heater lamp is continuously on for approximately 20 seconds during printer warm-up or in the standby mode. • The fixing temperature does not rise at least 1 °Cwhen the fixing heater lamp is continuously on for approximately 15 seconds during printing. • The fixing temperature does not lower when the fixing heater lamp is off for a specified time or more. * The fixing temperature is the average value calculated using the input voltage from the fixing thermistor detected several times in a specified time to avoid influence of noise and so on.
  • Code: 6020
  • Description: abnormally high fixing temperature error
    • The fixing heater lamp runaway protection circuit in the engine/high voltage PWB outputs continuously the abnormally high temperature detection signal (HTEMPN) to the CPU for a longer time than specified.
  • Code: 6400
  • Description: fixing heater lamp control zero-cross signal detection error
    • The zero-cross signal (ZCROSS) that is output from the power source PWB and input to the CPU on the engine/high voltage PWB is not input for a specified time.
  • Code: F0
  • Description: communication error between the operation panel PWB and main PWB
    • Serial communication between the operation panel PWB and the main PWB malfunctions.{
  • Code: F010
  • Description: code ROM checksum error
    • Checksum of the code ROM PWB attached to the socket (YS1) on the main PWB malfunctions.
  • Code: F020
  • Description: main PWB RAM checksum errorion error
    Checksum in the standard RAM mounted on the main PWB or in optional expansion memory is not correct. {
  • Code: F030
  • Description: main PWB controller errororion error
    • The controller (CPU) on the main PWB malfunctions.
  • Code: F040
  • Description: communication error between engine/high voltage PWB and main PWB controller
    • Communication between the CPU on the engine/high voltage PWB and the controller (CPU) on the main PWB malfunctions.
  • Code: F050
  • Description: engine/high-voltage flash memory checksum error.
    • Checksum of the program built in the CPU on the engine/high voltage PWB is not correct.
  • Code: F080
  • Description: system firmware download error
    • Checksum is not correct when system firmware is downloaded. • The flash memory is empty.
Download WordPress Themes
Free Download WordPress Themes
Download Best WordPress Themes Free Download
Download Nulled WordPress Themes
free download udemy course
download coolpad firmware
Download WordPress Themes
free online course
© Все права защищены, 2020

Мы позвоним Вам по указанному номеру телефона в ближайшее время.

Нажав кнопку сделать заказ сейчас, Вы подтверждаете свое согласие на обработку персональтныйх данных
Ваша заявка принята
Мы свяжемся с вами в ближайшее время